HOME|FELT FLOWER WREATH

Diy Felt Flower Wreath - A Step - By - Step Guide To Blooms

★★★★★ 4.8 · 36

Wren Halloway03.08.2026JUMP TO TUTORIAL

I started making felt flowers the same year my tomatoes lost their annual war with the squirrels — I needed something in my garden that would actually survive the season. A few years and a lot of glue-gun burns later, this felt flower wreath is the one my front door has worn every spring since. It costs less than a bouquet from the grocery store and it will still look perfect next April.

Picking the Bones of Your Wreath

Before we even touch felt, let's talk about what all these flowers are going to sit on, because that part never shows up in step-by-step photos and it trips people up. I use a 12-14 inch grapevine wreath form for this project — they're a few dollars at any craft store and the twiggy texture peeks through nicely between blooms. A foam wreath wrapped in burlap or felt works too, and it holds hot glue a little more forgivingly if you're newer to the glue gun.

Grapevine: rustic, breathable, holds wire stems beautifully
Foam: smoother surface, easier for beginners to glue flat
Straw wrapped in felt scraps: the budget option — I did this my first year

Whichever base you choose, set it aside now. We'll come back to it once the flowers are done.

What's on My Table Right Now

Materials laid out for a diy felt flower wreath, including felt sheets, scissors, and a hot glue gun.

Here's exactly what's spread across my dining table as I write this, Mochi included (she's currently sitting on the teal felt, because of course she is). You want 1-2mm thick felt sheets — anything thinner puckers when you glue it, anything thicker gets hard to roll for the rose. I buy mine in mixed color packs; a bag of ten sheets runs about eight dollars and makes more flowers than you'd think.

You'll also need fabric scissors kept strictly for fabric (mixing them up with your paper scissors dulls them fast — ask me how I know), a ruler, pencil or fabric chalk, a hot glue gun, floral wire, floral tape, and buttons or small felt circles for centers. A needle and thread is optional backup if a center ever wiggles loose.

Tracing the Shapes That Make Everything Work

Paper templates for petals and leaves used to cut felt pieces for a diy felt flower wreath project.

My design background comes out hardest right here. Templates are the unglamorous part of this whole project, but they're the reason every petal ends up matching. I trace each shape onto cardstock, not regular paper — cardstock holds its edge through repeated tracing, and you will trace these dozens of times.

The shapes you need

Rose spiral: 10 cm circle, 1.5 cm spiral width
Pointed petals: 3 x 2 cm, cut 8, for the daisy
Rounded petals: small (2.5 x 2 cm), medium (3 x 2.5 cm), large (4 x 3 cm)
Leaf template: 6 x 3 cm
Center circles: 1.5 cm and 3 cm

Label each one in pencil before you cut a single piece of felt — future-you, mid-project, will thank past-you.

Cutting Your Felt Pieces

Felt pieces cut and sorted by size and color, ready to become the blooms of a diy felt flower wreath.

This is where the table starts looking like a florist exploded. Trace your labeled templates onto the felt and cut clean, even edges — jagged cuts show once the petals overlap, so slow down here even if scissors aren't your favorite part. I sort everything into little piles by size as I go: it saves so much time later when you're assembling half-asleep with coffee number two.

A messy cutting pile is how a five-minute assembly step turns into a twenty-minute scavenger hunt. Sort as you cut, not after.

For one full bloom you're cutting nine large petals, seven medium, five small, plus a center coil and backing circle. For the daisy, eight pointed petals, a fringe strip, and a 3 cm backing circle. Keep colors mixed across your piles — this is exactly how you get a wreath that doesn't look uniform and stiff.

Rolling a Felt Rose

Step-by-step photos showing how to roll a felt spiral into a rose for a diy felt flower wreath.

My first felt rose looked like a cinnamon roll that had given up on life. The trick is patience with the outer tail: start rolling from the outside end of your 10 cm spiral, keep the first two turns tight so the center doesn't gape, then let the rest go looser — that looseness is what makes the outer petals fan open naturally instead of staying flat.

Add tiny dots of hot glue every few turns as you roll, not one giant blob
Glue the round base tab underneath and press for a full 10 seconds
Use a larger spiral if you want a fuller, blowsier rose

Press that base while it's still warm. Hot glue grabs fast but felt this dense needs a firm hold before it sets, or the whole spiral unwinds in your hand — I've reglued more than one rose learning this.

Making the Daisy

Assembling a fringed felt daisy with petals and a fluffy center for a diy felt flower wreath.

The daisy is the one I taught in my library workshop because it's genuinely the easiest bloom here, and it always gets a happy little gasp from beginners. Glue your eight pointed petals evenly around the 3 cm backing circle, overlapping the bases slightly so no bare felt peeks through underneath.

For the center, snip fine fringe cuts into your yellow strip, stopping about 3 mm from the edge — go closer and the fringe falls apart when you roll it. Roll the fringed strip tightly into a coil, glue it into the middle of the petals, then tuck a leaf or two underneath before it sets.

Formula: one circle + eight petals + one fringed strip = one cheerful daisy that photographs beautifully against darker blooms.

Building the Layered Bloom

Layering large, medium, and small felt petals to build a full bloom for a diy felt flower wreath.

This is the showstopper flower and, honestly, my favorite thing to make with a second cup of coffee. Work strictly from large to small: glue nine large petals around your backing circle first, add seven medium petals offset between the gaps of the first layer, then five small petals nestled into the center.

Offset each layer so petals peek out between the ones below — this is what gives the bloom depth instead of looking flat
Overlap petal bases generously; a stingy overlap leaves bald patches
Finish the center with a rolled coil strip or a button, whichever you have on hand

My color theory brain always wants a warm center against a cool outer layer — teal petals with a coral and yellow center is the combination that's ended up on this wreath the most.

Adding Leaves and Stems

Wrapping floral wire with green tape to add a stem and leaves to a felt flower wreath bloom.

Cut your floral wire to about 18 cm and glue a felt backing circle over the back of each finished bloom, pressing it firmly before you touch anything else — hot glue needs a moment to grip wire, and an impatient hand here is how a flower ends up on the floor instead of the stem.

Wrap the wire in green floral tape at a slight angle, working from the base of the flower down. Tuck two or three leaves in underneath the bloom, angled opposite each other rather than lined up, then bend the stem with a gentle curve for a more realistic look. I reuse the same garden wire I stake my doomed tomatoes with for this — it's stiff enough to hold a shape and costs nothing extra.

Arranging (and Gluing) Your Blooms

Finished felt roses, daisies, and layered blooms arranged before gluing onto a diy felt flower wreath.

Lay every finished flower and leaf out on your table before any glue touches the wreath base — this is the step people skip and then regret. Move things around the way you'd arrange a bouquet: cluster your big layered blooms first, tuck daisies into the gaps, and let a few rolled roses spill over the edge.

My finishing checklist

Trim any loose threads or fringe bits
Let glue set for a full minute before repositioning anything
Shape petals with your fingers for a softer, less crafted look
Mix warm and cool colors across the wreath for balance

Once you're happy with the layout, glue flowers directly onto the grapevine base, working in one direction so stems tuck under the next bloom's petals and nothing looks like an afterthought.

The Afternoon I Actually Made This Whole Wreath

The step photos show the technique, but they don't show what my actual craft table looks like mid-project — glue gun cord tangled, felt scraps everywhere, ring light on because I'm filming for the blog while I work. I wanted to show you the real, slightly chaotic version of this project, because that's the version you'll actually be making at home too.

Wren Halloway arranging felt sheets and tools at her craft desk while making a diy felt flower wreath.

This is my usual setup: yarn wall behind me, computer open to my notes, felt sheets fanned out like I'm about to deal cards. I do almost every project at this same table, whether it's crochet or felt — the light from that window is why I never move it.

Hands tracing a spiral rose template and cutting petal shapes for a diy felt flower wreath at home.

Tracing templates always takes longer than I tell people it will. I had a podcast going during this part and lost track of time — cutting the spiral cleanly matters more than cutting it fast, so I don't rush this step even when I'm itching to get to the fun part.

Cutting a pink felt spiral into a rose shape for a handmade diy felt flower wreath project.

My scissors were already starting to drag a little by this point in the pink spiral — felt dulls blades faster than paper does, which is exactly why I keep a separate pair just for fabric now, after ruining a good pair of paper scissors years ago.

Close-up of hands rolling a pink felt spiral into a rose for a diy felt flower wreath tutorial.

You can see the rose mid-roll here, right before the base glue goes on. My thumb was genuinely sore after the fourth or fifth rose in a row — if you're making a whole wreath's worth, take breaks, your hands will thank you.

Assembling a yellow felt daisy flower with fringed center for a diy felt flower wreath at a craft desk.

Assembling the daisy center is oddly meditative, though Mochi tried her best to relocate a few petals off the table during this exact shot. I keep a shallow bowl nearby now just to corral loose pieces.

Layering teal, coral, and yellow felt petals to build a full bloom for a diy felt flower wreath.

This teal, coral, and yellow combination took me three tries to land on — I laid out a few different palettes before this one before deciding it was the one going on the actual wreath. Old design habits never really leave you.

Wrapping green floral tape around a wire stem while adding leaves to a felt flower for a wreath.

The wire I'm taping here is leftover garden wire from staking tomatoes earlier that summer — the squirrels won again, but at least the wire found a second life holding up a felt zinnia stem.

A full arrangement of finished felt roses, daisies, and blooms laid out before assembling a diy felt flower wreath.

This flat-lay moment right before gluing everything onto the grapevine base is my favorite part of the whole process — seeing the full palette together for the first time, knowing the wreath is about to actually exist.

More Pinterest Visuals

Make A Gorgeous Diy Felt Flower Wreath In 16 Simple Steps

Make A DIY Felt Flower Wreath With 16 Step-By-Step Photos

Pin All Visuals

Conclusion

There is nothing precious about this wreath — it's forgiving, it's cheap to make twice if your first attempt goes sideways, and it will still be hanging on your door long after the actual flowers in my garden have given up for the season. Go slow on the roses, mix your colors bravely, and don't worry if your first bloom looks a little lopsided. That's exactly how mine started too.

Happy stitching,

Wren

Hi! I'm Wren

Hi, I'm Wren — welcome to my cozy corner of the internet! I'm Wren Halloway: crocheter, amigurumi enthusiast, recovering perfectionist, and the…

MORE ABOUT ME

Popular

AmigurumiCrochet Bunny Amigurumi Pattern - A Soft Chenille Plush You

AmigurumiNo - Sew Plush Turtle - A Crochet Amigurumi You Join

Seasonal8 Diy Gift Ideas For Boyfriend That Actually Feel Handmade

Beginner's CornerDiy Altoid Tin Makeup Kit - How I Turn Tiny Tins Into Sweet

Common Questions

What thickness of felt works best for this wreath?

I stick to 1-2mm wool-blend or acrylic felt sheets. Anything thinner puckers when glued and anything thicker fights you when you try to roll the rose spiral.

Can I skip the floral wire and just glue flowers straight onto the wreath?

You can, and it's actually easier for a first attempt. I still like wire stems because they let a few blooms sit slightly forward, giving the wreath more dimension.

How long does one full wreath take from start to finish?

Realistically, plan for a couple of sittings. Templates and cutting take about half an hour, but assembling twelve to fourteen full flowers is the slow, happy part — give it an afternoon.

My hot glue is showing through the felt — what went wrong?

You're using too much at once. Small dots, spaced out, hold felt just as securely and dry invisible. A big blob always seeps through and leaves a shiny patch.

Comments

No comments yet — be the first!